All posts by admin

Over-priced High Performance Blenders

By admin on

According to a consumer study, the ideal price point for a durable high performance blender is from $250 to $300. And when consumers are finally offered a $200 blender they are not fully aware what a true high performance blender is. As a result they buy just about anything that appears to fit into their budget.

The ideal and durable high performance blender however is either a 2 hp or 3 hp blender. Recognized blender brand names like the Vita Mix, Waring, and Blendtec blenders cost between $350 and $600. Another true high performance blender brand has emerged however for $250. This one is uniquely equipped with a 3 hp motor yet yields in the blending torque of a 2 hp blender. Waring has a 3.5 hp blender that yields in a 3 hp blending torque. The Blendtec and Vita Mix blenders, each 3 hp, yield in 3 hp torque and the Vita Mix 2 hp yields in 2 hp blending torque.

The blenders considered in this price study are following:
– Vita Mix Vita Pre 2 / 1003
– Vita Mix Vita Prep 3 / 1005
– Vita Mix TurboBlend 4500 Blender
– Vita Mix 5200 Blender
– Waring MX1050XT
– Waring MX1200XT
– Blendtec HP3A Blender
– Blendtec Total Blender

Vita Mix blenders have been made for over 80 years, Waring for over 60 years, and Blendtec (aka K-Tec) for over 35. The Vita Mix blenders have probably the greater authority and experience in reliable blender building. Its 2 hp Vita Mix 4500 Turboblend Blender has been chosen the 2 hp blending torque standard; the measure of all.

In comparison to the Vita Mix 4500 2 hp Turbo Blender (nothing really turbo about this blender), the 3 hp Vita Mix Vita Prep 1005/3 commercial blender is a much stronger blender. It blends everything that the Vita Mix 4500 Turbo Blender blends only in about half the time. The result is finer and much more emulsified than with the 4500 Blender.

The Waring and Blendtec 3+ hp blenders are just about the same as the Vita Mix Vita Prep 3 hp blender, when it comes to emulsifying flax seed, strawberry nuts, making peanut butter or grinding wheat into flour dust. A 2 hp blender to the other hand takes more time, the content gets warmer, and at the end there are slightly rougher pieces left than in a 3 hp blender. We are not talking big of course. The emulsified seed and nut piece-size difference is in the 0 millimeters. You still however can see little dots of seeds.

Price differences between a 2 hp blender to a 3 hp blender from Vita Mix is over $150 in respect to the Vita Mix 4500 Turbo Blender and the 3 hp commercial Vita Prep 1005. The Vita Mix 5200 blender, also a 2 hp blender is of course just as expensive as the Vita Mix 3 hp blender. It would not make sense to acquire the 5200 model when one can get a 3 hp for the same price.

A 3 hp motor in China or Taiwan, if bought by 1000 to 5000 units in one shipment, costs between $15 and $25 dollars. Based on a production cost study, it has been found that high performance blenders such as the Vita Mix, Waring, and Blendtec Blenders (including the OMNI and the Health Master Blender) cost between $40 and $100 dollars. Then of course it becomes a question why these powerful blenders cost retail between $350 and $600?

Vita Mix Corporation, for example, has an interest to protect its market. A price battle between dealers could threaten this market. The company sells its blenders, just like Blendtec and Waring, to consumers through dealers. Dealers most of the time purchase their inventory from distributor wholesalers. Distributors have a contact factory rep to go to for inventory placement. Everybody wants his cut of the pie, increasing the cost to the consumer. Of course, for blenders such as the Vita Mix 5200 at about $450 sold consumer direct and the affiliate marketers getting paid about $70 to $80 in commission, leaves for Vita Mix about $370 in gross profit.

The Vita Mix 4500 Turbo Blender, as simple as it is and equipped with a 2 hp motor costs about $70 in production. Suggested retail price is $ 400. Wholesale price is $ 275.00 and the Distributor purchases the blender for around $ 230.00. But if you compared this blender with the Vita Mix 2 hp Commercial Vita Prep 2 blender which costs retail $ 400 as well, and cost wholesale $ 440, it does not really justify why a Vita Mix 4500 without the variable-speed turning knob should cost the same.

While the ideal price of the Vita Mix 4500 Turbo Blender is $330, based on consumer demand and availability, it is overpriced advertised. Dealers are allowed to receive phone calls to sell the blenders for whatever price they agree on. But if found in MAP advertising violation, dealers will be cut off from its wholesaler and manufacturer. All, Waring, Blendtec, and Vita Mix follow this rule. However, a blender margin too big, and too many competing blenders, better, more sophisticated with more power sold to consumers for less makes an advertising price demand difficult to follow.

Job Opportunities In Indian Aviation Industry

By admin on

After Sept 11, 2001 when USA got struck by terrorist attack, almost all the industries has been affected. But Aviation Industry is one of the hardest hit, as the major airlines likes of Swiss Air and American airlines. But despite of all these happenings Indian Aviation industry though minute could withstand this pressure and had grown leaps and bounds. This is due to the growth of Indian economy and tourism industry in particular in the last few years.

In the last two years many a new airlines have come to the fore in a huge way and many huge industries have declared their wishes to enter into this industry. Another major leap was the open sky policy of Government of India permitting the existing private airlines in India to fly to foreign destinations.

It does require a special mention that with such expansions planned by major aviation companies and new companies formed there is a vast manpower requirement. Qualified manpower is in huge abundance in India but they need a proper direction to capitalise on this surge in industry. When the human resources needed by these companies were less in number, it was easy to tap from a huge HR bank but when the demand for such HR increased they are finding it extremely difficult to maintain the quality of HR selected for these jobs especially when more and more foreign airlines are flying into India offering high salary packages forcing the better of HR to go with these companies.

It is important to mention here that Indian aviation industry grew by 20% second only to BPO industry in services sector and then comes the concept of no frills airline the market for which is growing vastly. Many no frills airline have already announced their plans to start services to India a few of them are Nok Air, Air Asia-Thailand, Air Arabia etc.

The boom in the aviation sector in India can be gauged by the fact that in one year, the number of people seeking pilot licenses and airhostess training has multiplied three times. In April 2005, it was 300. In April 2006, the number rose to 1045. The civil aviation industry is booming. Indian airlines placed orders for over 400 aircraft worth a whopping $30 billion for its operational requirements. That shows a requirement of 5600 pilots, 19000 airhostess or cabin crew, 24000 technicians, 36000 ground handling crew and various other related vacancies.

And these aviation industry vacancies are all fresh vacancies without including vacancies that may come up in the existing aircrafts.

Also the pay packages offered by the various Indian airlines have also seen an upward trend due to very few number of trained pilots and cabin crew availability. Hence there is an opportunity for you.

Indian aviation is witnessing a mushrooming of new airlines especially low cost carriers. Besides the existing Air Deccan, newly launched Spicejet and value airline Kingfisher Airlines, there are Indus Airways, Air One, East West Airlines, Go Airways, Magic Air and Crystal Air who are getting ready to fly Indian sky soon. India is to see the launch of at least 14 such airlines. Low cost start-up carrier IndiGo had stunned the aviation industry by placing orders for 100 aircraft at a list price of over $6 billion last year.

Start Up Machine Tools And Shop, Woodworking, Wood Machinery Equipment, Business Loans, Financing

By admin on

Start up machine tools, machine shop, woodworking, wood machinery equipment business loans, capital, financing, leasing with credit problems is still available in these economic times.

This article is going to discuss what is machine tools, machine shop, woodworking, wood machinery equipment leasing/financing, what are its benefits, leasing plans and how it relates to the start up business.

Additionally, we will show you lending requirements below for start up loans

Leasing is a form of renting but with a buyout clause at the end of the lease to take title to whatever we are leasing. The requirements to get into the lease may be as low as first and last payment and as much as 25%. Each situation is different and this offers the start up and seasoned business a way to invest very little monies into the business. Additionally, all other monies can be used for operating expenses such as marketing and other key areas. Leasing is not a new form of financing but could be a lending solution to the start up business.

The benefits of leasing may result in off-balance sheet financing reporting, tax incentives and conserving cash flow and preserving lines of credit for working capital purposes. Many leasing requirements may only require the initial outlay of first and last rental payment. Most leases finance 100% of the cost of the equipment such as soft costs which include shipping, software, training and installation. Additionally, leasing lets you regularly upgrade your equipment, eliminating your utilization of old, outdated equipment and reducing repair options.

Some of the leasing plans available to the lessee are $1.00, 10% or 20% purchase options as well as Trac Leases and FMV lease buyouts. Additionally, some lenders offer seasonal payments, deferred payments for ninety days, declining payments and half payments for a specified time period. It is important that the lessee understands all these different lease plans available as well as the buyout clauses. The lessee has many options to consider in negotiating his lease. He must understand each lender’s requirements and see if it fits within the realm of the lessee’s requirements.

Some lenders will accept the start up business whereas others will not wanto lend to this group. They consider that their risk capital can be invested in other types of portfolios that can be better served. Many lenders require full documentation which includes a couple of years of personal income tax returns, a personal financial statement, and other underwriters requirements. However, in the past couple of years, there is a select group of lenders out there require an application only program. These lenders have their own computer scoring model and eliminate the necessary additional paperwork of other lenders.

These application only programs are usually restricted to the seasoned business, however there are a few out in the industry which will work with the start up business as well. The amounts of the application only program run as high as $150,000 for the seasoned business and $10,000 for the start up. Additionally, the lender will lease the qualified asset probably from 36-60 months and many won’t finance any equipment and commercial vehicles over ten years old.

It is important to understand the lease terms, the rate factor the lender is charging and the buyout clauses in the lease to take title. If you anticipate paying off the lease early, you should consult your lender to ascertain there is no prepayments for a early payoff. The last thing to understand that the lessee is going to guarantee the lease.

*************************************************
1) Recap of Start Up Business Loan, Financing Programs Up to $40,000**********Conventional Financing, Bad Credit

0-2 Years Time In Business, Story Book Lender, Credit is Run but isnt Credit Driven, High Cash balances help a lot for approval
For New Business Start-Ups: (terms 12-30 months) Up To $40,000

1. Completed Credit Application
2. Personal Credit Report from all Principals
3. Last Years Personal Tax Return
4. Evidence of an Alternate Source of Income*********
5. Personal Financial Statement on All Owners
6. Evidence of a Business Bank Account (this may not be open yet)

If a Business has been open for a few months, please retrieve bank statements
Lease Terms are Up To 36 Months10% Buyout Clause

2 ) Second Start up Lending Program.
If you have good credit for other start up financing, minimum credit score 650 or higher, the down payment for conventional financing may be any from 10 to 30% down. Industries include owner operators for semi, day cabs and dump trucks. Other industries such manufacturing, construction, medical, transportation may also be eligible. Paperwork requirements are basically the same as above.

3) If you dont qualify for the start up programs above, we have many off lease and repo financing programs that start as low as 550 for minimum credit scores, financing up to $100,000, Down payments as low as $1,000

Happy hunting for your machine tools, machine shop, woodworking, wood machinery equipment acquisition and its start up financing and business loan programs

Academic Degree in Business Management

By admin on

In a capitalist world, where decisions of one countrys economy affect the market economy of others, the importance of business management does not need an introduction. In todays fast-paced world, young graduates need to be well versed with the shades of the business management so that they can keep for themselves an upper hand in the era of the cut-throat competition.

Business management can be done in both graduation and post graduation level, in many respective fields such as:

– Marketing
– Finance
– HR or Human Resource
– Information Technology
– International Business
– Retail Management
– Operational Management
– Entrepreneurship

Importance of business management

In a corporate world, business management involves activities such as conceptualization, direction, buying, traffic management, stock planning and control, process scheduling and control, process methods and planning, quality management, stock management and production planning and a lot more than these.

Business, today, not only caters to our needs but also has got integrated into our daily lives and lifestyle by shaping our desires. One who can manage business is sure to get placed well in the world where commerce drives almost all other disciplines. Business Management hence is the upcoming and the most interesting field of study which has a dynamic scope for growth.

Career growth in business management

Professionals with a degree in business management gain a lot of demand in the market due to their unmatched skills and knowledge. They not only get a desirable and lucrative salary but, also an identity in the industry.

Many universities today focus to offer specialized post graduate degree courses in Business Management. These courses have become the most sought after courses due to their vast expanse over the market, huge opportunities of jobs and their high potential to train young minds on how to escalate up the social ladder of success.

An academic degree in Business Management becomes an asset and is important to possess for anyone who wants a rewarding career in their business field.

Buying Steel Tip Shoes

By admin on

Purchasing poorly fitting steel tipped shoes or boots can be absolutely horrendous on feet that are forced to wear them. Steel tips are not altogether the most comfortable shoe ever produced to begin with. Forcing a foot into an ill-fit pair is reticent of slowly breaking the toes one by one on a daily basis.

Steel tipped shoes or boots are quality protection for the feet in construction jobs, jobs in the automotive industry, some manufacturing jobs, and of course any project or profession that requires safety gear to prevent injury.

Most professions that require steel tipped boots or shoes are professions associated with physical labor and labor that is intensive and permits for very little sitting down. This causes the feet to sweat and swell, especially in hot weather. This creates less room for the foot to increase inside the shoe. If you equate a steel tip shoe or boot to a metal cast that would be used for a broken leg, there obviously isn’t much give to these shoes.

The two main reasons that people replace their steel tipped boots or shoes is because of a lack of comfort or because wear holes have formed on the tips of the shoes. It takes many years for a quality pair of steel tipped shoes or boots to break down and need replacing for lack of support.

Steel tipped boots and shoes are really quite expensive as far as shoes go. It is unreasonable to continuously replace them due to lack of comfort while wearing them. It is much more financially sound to buy a good fitting pair and get the use out of them that is perfectly possible.

Buying steel tipped shoes or boots at the end of a work day is naturally the best time to insure a good fit. Your feet will be only slightly less swollen than they are at the end of the work day, although in some cases they will actually be more swollen than any other time of the day. This allows you to judge whether there will be enough room in the toes throughout the entire day in your new steel tips.

Despite their overall lack of comfort, steel tipped shoes and boots provide excellent protection against broken toes on the job. They are remarkably durable and if the right fit is made at the time of purchase, can last several years of good quality service.